Including the large capacity range of furnaces which cover 45 litres inner volume, our standard range Protherm Chamber Furnaces cover a very satisfactory range from 1100°C to 1600°C, all of which are front loading for easy operation and double skin construction to maintain a cooler outer case. Upto 1300°C, open wire based models are produced.  where the elements are suppor ...

Standard Chamber Furnaces cover a range from 1100°C to 1600°C, all of which are front loading for easy operation and double skin construction to maintain a cooler outer case. Standard models upto 1300°C range, employ open wire heated systems where the elements are supported on ceramic tubes.  For temperatures over 1400°C, Kanthal Globar series Silicon Carbide heating e ...

The important advantage of these models is that element change is very easy and economic. Low thermal mass insulation leads to a very impressive heat up rate as well as efficient insulation. Temperature control provided either by PID or Programmable PID controls depending on customer requirements. Chamber exhaust vent is a standart till 1300°C and should be specially required for furnaces o ...

Standard Chamber Furnaces cover a range from 1100°C to 1600°C, all of which are front loading for easy operation and double skin construction to maintain a cooler outer case. Standard models upto 1300°C range, employ open wire heated systems where the elements are supported on ceramic tubes.  For temperatures over 1400°C, Kanthal Globar series Silicon Carbide heating e ...

Some of laboratory processes where atmosphere control is vital, require a tube furnace to be used. Alser AS manufactures tube furnaces of various tube diameters and heated lengths. Through application of Kanthal wire and silicon carbide heating elements the temperature range extends to 1600°C as operation temperature. The work tube is always price inclusive and is either Mullite or Recrysta ...

We have over temperature alarm relay as standart with all furnaces that employ SiC heating elements. We provide a limited Warranty for all of Protherm furnaces against faulty workmanship. But heating elements and ceramic work tubes are for consumption and is not covered by our warranty clause. We keep all spares at our stocks for quick delivery whenever a change is required. We ...

Standart mode for Tube furnaces are horizontal, when required vertical models are also possible for a minimal extra charge, please ask for quotations. Universal models where both vertical and horizontal operation Pls note that there is an extra charge for this modification are possible, are available for almost every model. ...

Some of laboratory processes where atmosphere control is vital, require a tube furnace to be used. Alser AS manufactures tube furnaces of various tube diameters and heated lengths. Through application of Kanthal wire and silicon carbide heating elements the temperature range extends to 1600°C as operation temperature. The work tube is always price inclusive and is either Mullite or Recrysta ...

We have over temperature alarm relay as standart with all furnaces that employ SiC heating elements. We provide a limited Warranty for all of Protherm furnaces against faulty workmanship. But heating elements and ceramic work tubes are for consumption and is not covered by our warranty clause. We keep all spares at our stocks for quick delivery whenever a change is required. We ...

Heating of split furnaces is via wire coils embedded in ceramic fibre, Kanthal-Fibrothal modules. Both models can be manufactured vertical or horizontal depending on Customer requirement.  ...

Standard tube furnaces where the heating elements are wound onto the ceramic tubes does not facilitate interchangeable tubes. By application of Kanthal HAS series heating modules we now produce a series of Modular Furnaces where operator can easily change the work tube whenever necessary. These furnaces can also be modified as 3-zone furnaces to achieve a wider stable heated zone, although the ...

PRECISION (3 ZONE)FURNACES Similar to construction of tube furnaces, 3 zone precision furnaces are designed to give the operator a much wider stable heated (± 5 °C) length through seperate controlled zones applied to the same tube. Heated length is divided into three zones where power is controlled by means of seperate controllers. Thus not only a longer heated tube length is achieve ...

Within the context of this cataloque we introduce the new series of “MoSi2 Heated Chamber Furnaces” covering the range of 1500°C to 1800°C. For this series of 1-10 litres capacity, powerful MOSi2 heating of Kanthal origin, placed at sides of chamber, are employed.  Vertical and manual lifting door has a safety switch to cut off power while open.  An ...

All Protherm controllers are applicable for this series. Applications for this series include almost all high temperature sintering processes suchas Ceramic, Dental and Material Research.  ...

We think our very new 1-2 litre furnaces quite interesting for those who require the temperature but not the volume. For small samples these furnaces will provide a very economical solution.  Together with our usual double skin construction and a very high grade insulation these furnaces give extremely good heat insulation, keeping the outer case cool.  ...

These furnaces are indispensable for high temperature Controlled Atmosphere, as well as vacuum applications. Heat shields are standard whereas the gas feed-in stainless steel End-Caps are optional. ...

High Temperature Tube Furnace series covering several heated lengths . Available in horizontal or vertical design, these furnaces are indispensable for high temperature Controlled Atmosphere, as well as vacuum applications. ...

Available in horizontal or vertical design, these furnaces are indispensable for high temperature Controlled Atmosphere, as well as vacuum applications. Heat shields are standard whereas the gas feed-in stainless steel End-Caps are optional. ...

We also manufacture electrical furnaces upto 10 m3 for Ceramics firing applications, based on customer specifications. Programming or standart PID control is available. ...

Ceramics firing applications, based on customer specifications. Programming or standart PID control is available. ...

Over 1000 ltrs we do not have any standart production for industrial furnaces, thus we require detailed customer information before quoting. ...

Ceramics firing applications, based on customer specifications. Programming or standart PID control is available. ...

Use of Tube Furnaces for Controlled Atmosphere applications are common in Research. The negative side of Tube Furnaces are their limited useful volume which is obviously dependent on the tube diameter. For Researchers that require a larger volume to work with relatively larger samples we now have a solution. ...

The furnaces which can operate under several atmospheres upto temperatures of 1800C, will be a handy and reliable alternative. Incooperated with a sideways opening lid, this series have the option of very tight gas flow if operated together with Mass Flow controllers which are optional. Related Vacuum pumps will also be supplied optionally. Applicable temperatures vary in between 1600 - 1800C. ...

The furnaces which can operate under several atmospheres upto temperatures of 1800C, will be a handy and reliable alternative. Incooperated with a sideways opening lid, this series have the option of very tight gas flow if operated together with Mass Flow controllers which are optional. Related Vacuum pumps will also be supplied optionally. Applicable temperatures vary in between 1600 - 1800C. ...