| Max. Temperature |
1750 °C
|
| Capacity |
60 L
|
| Heating Program |
8 step
|
| Thermal Rate |
3 °C - 20 °C
|
| Heating element |
MoSi₂ (Molybdenum disilicide)
|
| Program Memories |
6
|
| Thermocouple Type |
B Type
|
| Display |
4 x 20" LCD
|
| Heating Element Placement |
Vertically aligned next to the side walls
|
| Inner Insulation Material |
Ceramic Fibre Board
|
| Front Face Insulation Material |
Insulating Fire Brick
|
| Door Insulation Material |
Ceramic Fibre Board
|
| Housing Material |
Steel Sheet
|
| Housing Coating |
Epoxy powder coating
|
| Chimney |
Standard without fan
|
| Lockable Door Handle |
Sidewards
|
| Temperature Control Accuracy |
± 1°C (can vary at low temperatures)
|
| Measurement Accuracy |
± 1 °C
|
| Inner Volume Temperature Homogenity |
± 10 °C
|
| Auto Start at Certain Date |
Yes
|
| Show Remaining Waiting Time |
Yes
|
| Skip the Waiting Step |
Yes
|
| Burst Heating Mode |
Yes
|
| Max. Current |
3 x 37 A
|
| Power |
19.900 W
|
| Inner Chamber Dimension (W x H x D) |
320 x 420 x 450 mm
|
| Product Outer Dimension (W x H x D) |
672 x 1190 x 1059 mm
|
| Gross Dimension (W x H x D) |
732 x 1250 x 1219 mm
|
| Net Weight |
195 kg
|
| Gross weight |
234 kg
|
- ✔ PID controller
- ✔
LCD display that shows current and target temperature
- ✔
Optimum insulation properties
- ✔
4, 8, 16 step heating program availablev
MoSi₂ heating elements vertically aligned next to the side walls
- ✔
Accurate temperature measurement and control using S and B type thermocouple
- ✔
Unique electronic design and software
- ✔
Durable inside lining made of high quality light insulating bricks and ceramic fibre board
- ✔
Dual shell housing for low outer surface temperature
- ✔
Current limit control for safe operation
- ✔
Provision of sound warning as the step changes and at the end of the program
- ✔
Equipped with step indicator
- ✔
Instantaneous energy consumption indicator
- ✔
Step indicator
- ✔
Total working hour counter
- ✔
Descriptive error indicator
- ✔
Control unit over heating sensor
- ✔
Open door sensor
- ✔
Provision of automatic power cutoff to the heating element if the control unit/ control card is over heated
- ✔
User friendly operating menu
It is used for applications such as: Fusing glass, Creating enamel coatings, Ceramics, Soldering, Brazing, Rubbers & Polymers.It is also used for metallurgical applications, for ash content determination and in research centers and medical laboratories to determine the volatile & non-combustible proportion of the sample.
Over Temperature Limiter
Lift-up Door
Stainless Steel body
Gas Supply Connection
Open Door Sensor
Second Thermocouple
Observation Hole
PC Connection
110 V Power Supply
Inner Module: Changing inner module renews your furnace close to a brand new furnace
Door Insulation: With sheet metal holder vessel
Control Card: Easy-to-replace, pre-programmed
Power Card: Easy-to-replace
Display: 4 x 20 LCD display
Cooling Fan: 80 x 80 x 20/ 220 V fan
Chimney Fan: 40 x 40 x 10/ 5V fan
