Muffle Furnace is uniquely designed with optimum insulation properties and is ideal for ashing of food, plastic and other organic materials. With heating elements Fe-Cr-Al embedded into the brick walls, K type thermocouple and dual shell housing for low outer surface temperature, it is perfect for continuous working process at 950 °C.
Price: $1728
Max. Temperature | 950 °C |
Capacity | 3 L |
Heating Program | Two step |
Thermal Rate | 5 °C - 25 °C / min |
Heating Element | Fe-Cr-Al |
Program Memories | 2 |
Thermocouple Type | K Type |
Heating Element Placement | Embedded into brick walls |
Inner Insulation Material | Insulating Fire Brick |
Front Face Insulation Material | Ceramic Fibre Board |
Door Insulation Material | Ceramic Fibre Board |
Housing Material | Steel Sheet |
Housing Coating | Epoxy powder coating |
Chimney | Standard |
Element Heating Element Protection | Quartz Tube |
Lockable Door Handle | Sidewards |
Temperature Control Accuracy | ± 1 °C |
Measurement Accuracy | ± 1 °C |
Power | 1501 W |
Max. Current | 7A |
Inner Volume Temperature Homogenity | ± 10 °C |
Inner Chamber Dimension (W x H x D) | 130 x 105 x 230 mm |
Product Outer Dimension (W x H x D) | 336 x 434 x 533 mm |
Gross Dimension (W x H x D) | 420 x 620 x 620 mm |
Net Weight | 25 kg |
Gross weight | 35 kg |
PID controller
New mono block body design
7 segment display
Optimum insulation properties
Direct/ 2 step heating program
Fe-Cr-Al heating element embedded in brick walls
K-type thermocouple
Dual shell housing for low outer surface temperature
Ceramic fibre board as front face and door insulation material
Audio warnings as the step changes and at the end of the program
Provision of automatic power cut-off to the heating elements and alert if the control unit/ control card is over heated
User friendly
Sr. no. | Accessory |
1 | High Temperature Gloves |
2 | Tongs |
3 | Alumina Crucibles |
4 | Metal Crucibles |
5 | Alumina Combustion Boats |
6 | Ceramic Pipes |
7 | Extra Thermocouple |
It is used for applications such as: Fusing glass, Creating enamel coatings, Ceramics, Soldering, Brazing, Rubbers & Polymers.It is also used for metallurgical applications, for ash content determination and in research centers and medical laboratories to determine the volatile & non-combustible proportion of the sample.
Over Temperature Limiter
Gas Supply Connection
Observation Hole
PC connection
110 V power supply
Inner module: changing inner module renews your furnace close to a brand new furnace
Door Insulation: with sheet metal holder vessel
PCB: Easy to replace. Pre-programmed
Display card: 7 segment, 3 digit
Chimney Fan: 4 x 40 x 10 / 5 V fan