Request Quote
Scan the QR code below to connect with us on WhatsApp.
Request Quote
Scan the QR code below to connect with us on WhatsApp.
Lab Expo Rotary Evaporator LRE-A13 is a high quality rotary evaporator to meet the distillation needs of laboratory applications. Its optimized bath volume allows for fast heat-up and the condenser has glass tubes that utilize the 15000 cm² surface extremely efficiently. It is crafted for minimal space requirement and is integrated with heating bath, automatic motorized lift and bottom discharge receiving flask making it ideal for even complex distillation processes. This model of rotary evaporator delivers reliable and reproducible process results that are usually reserved for far more costly systems.
| Evaporating Flask | 50 L / F 125 |
| Optional evaporating flask | 20 L + 10 L , bottom discharge |
| Condensing surface | 1.5 m2 |
| Max evaporating speed ( H2O ) | 10 L / hr. |
| Lifting type | Automatic Lifting |
| Condenser Type | Vertical condenser |
| Rotation Speed | 3 – 110 rpm |
| Reachable vacuum rate | < 133 Pa |
| Bath Power | 9 kW |
| Heating power | 9000 W |
| Rotation power | 400 W |
| Static temperature control range and wave | RT – 99 °C , 150 °C ± 2 °C |
| Bath size capacity | 70 L |
| Material | SUS 304 |
| Certifications | ISO and CE |
| Power | 220 V / 60 Hz |
| Dimensions | 1300 x 800 x 2300 mm |
FunctionImplementationSolvent recovery operations10 L/hr enables continuous distillation throughputQuality control laboratories<133 Pa achieves required vacuum for purificationIndustrial pilot plants70 L bath capacity supports large-volume processingResearch and development labs9 kW power ensures rapid thermal responsePharmaceutical processing facilitiesSUS 304 material resists chemical corrosion
| Model No. | LRE-A13 |
| PTFE rotary seal assembly | Have |
| PTFE discharge valve | PTFE |
| Digital Display | Bath Temperature , Rotation speed |
| Taper joint PTFE sleeve | Have |
| Vacuum gauge | Have |
| Continuous receiving | Have |
| Bumping system | Have |
| Charging valve | Glass |
| Water bath lid | Optional |
| Cold trap protection system | Optional |
| Thermometer neck for vapor | Optional |
| Evaporating flask unload handler | Optional |
| Ex proof motor | Optional |
| Overall flange joints | Have |
| Frequency conversion speed controls | Have |
| Throttle valve for vacuum | Have |
| Optional evaporating flask ( baffles on request ) | 10 L, 20 L , 30 L |
