Pulp beating freeness tester 61-PPT106 Catalog

Pulp beating freeness tester 61-PPT106

Overview :

Lab Expo Pulp beating freeness tester 61-PPT106 is used to measure the rate of dilution of pulp suspended water materials and to determine de-watering time. It is adopted with spring pre-tightening mechanism keeps the rubber sealing ring of the sealing hammer body in contact with the bottom of the water filtering tube. This increases the sealing performance of the sealing hammer body.

Specifications:

Measurement range	0 to 100° SR
Sealed testing speed	100 ± 10 mm/s
Volume of distilled water	1000 ± 5 ml
Draining time	149 ± 1 s
Residual water volume	7.85 to 8 ml
Hydraulic pressure	>0.3 MPa
Dimension	450×250×1100 mm
Net Weight	40 kg

Features:

Schopper-Riegler test method with spring pre-tightening mechanism
Measurement range 0 to 100 SR with manual compression seal cone
Draining time 149 ± 1 s for precise pulp freeness evaluation
Hydraulic pressure >0.3 MPa for reliable sealing performance
Residual water volume 7.85 to 8 ml under standard conditions

Applications:

FunctionImplementationPulp testing labs1000 ± 5 ml volume handles standard sample quantitiesQuality control unitsDraining time of 149 ± 1 s enables repeatable measurement cyclesResearch facilitiesMeasurement range of 0 to 100° SR supports freeness analysisIndustrial settingsHydraulic pressure >0.3 MPa ensures consistent sealing performanceClinical environmentsSealed testing speed of 100 ± 1 mm/s allows precise operation control

123 W 1st St, Casper, WY 82601, United States.
Email: [email protected] | Website: www.labexpo.com