Request Quote
Scan the QR code below to connect with us on WhatsApp.
Request Quote
Scan the QR code below to connect with us on WhatsApp.
Lab Expo Pocket Conductivity Tester 25-PCT100 is equipped with platinum sensor & 1 point push button calibration system. The easy to use pocket conductivity meter comes with waterproof features design for protection against harsh conditions. Conductivity meter on the basis of its low, mid and high conductivity measurement range can be used for measuring conductivity of drinking water, waste water, brine water and liquids with high, low conductivity.
$1,709.00 $ 1424
| Conductivity measurement range | 1.0 to 199.9 µS/cm |
| Type of conductivity | Low range conductivity |
| Conductivity accuracy | ± 1 % F.S. |
| Conductivity calibration points | 1 point |
| Conductivity calibration solutions | 146.5 µS/cm |
| Sensor type | Platinum sensor |
| Temperature compensation | 0 °C to 50 °C |
| Temperature coefficient | 2 % per °C |
| Cell constant | K=1 |
| Normalization temperature | 25 °C |
| Data hold function | Manual |
| Display | LCD screen |
| Power off | Manual or automatic (8 minutes after last key is pressed) |
| Power | 3 × 1.5 V “G134” batteries |
| Battery life | Approximately 150 hours |
| Dimension (L*dia.) | 185 × 40 mm |
| Weight | 100 g |
Function Implementation Water quality testing Conductivity measurement range 1.0 to 199.9 µS/cm supports drinking and wastewater analysis Field water monitoring Battery life approximately 150 hours enables extended outdoor sampling sessions Low conductivity liquids Platinum sensor with K=1 cell constant measures brine and purified solutions Temperature-variable environments Temperature compensation 0 °C to 50 °C ensures accurate readings across conditions Rapid field verification Data hold function manual allows stable reading capture in variable settings
146.5 µS/cm, 1413 µS/cm, 12.88 mS/cm conductivity standard solutions
G134 batteries
Carrying box
84 µS/cm, 1413 µS/cm, 12.88 mS/cm, 111.8 mS/cm conductivity standard solutions
Platinum conductivity electrode
Lab Expo Conductivity Tester units are designed for liquid conductivity measurement across low to high concentration ranges in field and lab workflows. The range spans from 1.0 µS/cm to 19.99 mS/cm with accuracy up to ±1 % F.S., supporting low, mid, and high conductivity applications. Compact pocket formats with temperature compensation and calibration functions enable consistent readings. Suitable for water quality monitoring, process control, and routine testing where portability and measurement range selection are key.
