Request Quote
Scan the QR code below to connect with us on WhatsApp.
Request Quote
Scan the QR code below to connect with us on WhatsApp.
Lab Expo Pocket Conductivity Tester 25-PCT101 is equipped with platinum sensor & 1 point push button calibration system. The easy to use pocket conductivity meter comes with waterproof features design for protection against harsh conditions. Conductivity meter on the basis of its low, mid and high conductivity measurement range can be used for measuring conductivity of drinking water, waste water, brine water and liquids with high, low conductivity.
$1,752.00 $ 1460
| Conductivity measurement range | 10 to 1999 µS/cm |
| Type of conductivity | Mid-range conductivity |
| Conductivity accuracy | ± 1 % F.S. |
| Conductivity calibration points | 1 point |
| Conductivity calibration solutions | 1413 µS/cm |
| Sensor type | Platinum sensor |
| Temperature compensation | 0 °C to 50 °C |
| Temperature coefficient | 2 % per °C |
| Cell constant | K=1 |
| Normalization temperature | 25 °C |
| Data hold function | Manual |
| Display | LCD screen |
| Power off | Manual or automatic (8 minutes after last key is pressed) |
| Power | 3 × 1.5 V “G134” batteries |
| Battery life | Approximately 150 hours |
| Dimension (L*dia.) | 185 × 40 mm |
| Weight | 100 g |
Function Implementation Water quality testing Conductivity measurement range: 10 to 1999 µS/cm enables field analysis of drinking and waste water Laboratory calibration Conductivity calibration solutions: 1413 µS/cm supports single-point standardization Environmental monitoring Temperature compensation: 0 °C to 50 °C ensures accurate readings in variable conditions Industrial process control Battery life: Approximately 150 hours allows extended operational use Field service operations Dimension (Ldia.): 185 × 40 mm facilitates portability in tight spaces
146.5 µS/cm, 1413 µS/cm, 12.88 mS/cm conductivity standard solutions
G134 batteries
Carrying box
84 µS/cm, 1413 µS/cm, 12.88 mS/cm, 111.8 mS/cm conductivity standard solutions
Platinum conductivity electrode
Lab Expo Conductivity Tester units are designed for liquid conductivity measurement across low to high concentration ranges in field and lab workflows. The range spans from 1.0 µS/cm to 19.99 mS/cm with accuracy up to ±1 % F.S., supporting low, mid, and high conductivity applications. Compact pocket formats with temperature compensation and calibration functions enable consistent readings. Suitable for water quality monitoring, process control, and routine testing where portability and measurement range selection are key.
