Spread of Flame Apparatus 70-SFA100

Name: Spread of Flame Apparatus 70-SFA100
Brand: Lab Expo
SKU: 70-SFA100
Rating: 4.8 (997 reviews)

★ ★ ★ ★ ★

70-SFA100 Spread of Flame Apparatus measures the flame spread of the materials. The IMO marine specification includes a collection hood for heat release measurement. The apparatus is constructed depending on the requirements of the standard and essentially two main items, the radiant panel framework and the specimen support framework, and many supplementary items.

Name Please enter a valid name.

Email Please enter a valid email address.

Product

Message

Electrical	230 Volts AC 50 Hz or 115 Volts AC 60 Hz
Gas supply	The radiant panel of the apparatus can burn propane or natural gas. Typical gas supply requirements are a flow of up to 0.8 litres/second at a supply pressure of 200 mm water gauge.
Air supply	Air supply of up to 10 litres/second and at a supply pressure of approximately 300 mm water gauge is required
Dimensions (W×H×D)	The radiant panel has overall dimensions of approximately 480 mm by 280 mm

The panel is manufactured from all-welded square tubular with mild steel material and includes all the associated pipework and control valves for the radiant panel
The panel consists of porous refractory tiles mounted in a stainless steel housing and it is mounted on the support framework on a rotating steel ring which allows the specimen for the testing in different orientations
It is designed for use with natural gas or propane gas and the gas is mixed with air before entry to the panel
The pressure governors and control, it has shut off valve for both gas and the air
Integrated with variable area flowmeters in the pipework to allow the gas and air to the radiant panel to be controlled and monitored
Consist fixed control box to the framework which contains indicators of lamps and push-buttons associated with the gas safety system
The framework which supports the test specimen is made from all-welded square tubular mild steel sections
One side of the framework contains a steel guide which carries the specimen holder
In the test position, the surface of the specimen at the end of adjacent to the radiant panel is brought close to a test flame from a stainless steel tube fixed to the support frame and supplied with gas/air mixture from the main gas supplies on the radiant panel support framework
The heat release stack us mounted on the specimen support framework and directly above the test specimen, such that the combustion products rising from a vertically mounted specimen are channelled into the stack
The specimen support framework is connected to the support frame for the radiant panel by the spacer and fixing bolts
The stainless steel specimen holder is constructed according to the requirements and specifications
A spring-type loaded quick action clamp for easy loading and retention of the test specimen is also provided
It has a calibration board and a heat flux meter
The calibration board is made with calcium silicate-based board material and is provided with a series of holes, when the calibration board is inserted into the test apparatus, positions the heat flux meter at prescribed calibration locations
The output from the meter can be monitored on a suitable recording device or from the optional data acquisition and software system
It consists specially designed device which enables the outputs from the thermocouple on the heat release stack to be conditioned as required based on the specification

The Spread of Flame Apparatus measures the flame spread of materials in marine and railway applications

Spread of Flame Apparatus 70-SFA100

Customer Reviews

DANIEL

Jul 22, 2024

"Nice Product!"

PRIYA

Jul 30, 2024

"Nice Product!"

Submit Your Review

Name:

Rating:

Review:

Drug stability chamber

Drug Stability Chamber 150-DSC100

Volume: 150 L
Temperature Range: 0 to 65 °C
Temperature Fluctuation: ± 0.5 °C
Temperature Control Precision: 0.1 °C

Drug Stability Chamber 250-DSC101

Volume: 250 L
Temperature Range: 0 to 65 °C
Temperature Fluctuation: ± 0.5 °C
Temperature Control Precision: 0.1 °C

Drug Stability Chamber 500-DSC102

Volume: 500 L
Temperature Range: 0 to 65 °C
Temperature Fluctuation: ± 0.5 °C
Temperature Control Precision: 0.1 °C

Drug Stability Chamber 150-DSC200

Volume: 150 L
Illumination Intensity: 0 to 6000 Lux
Temperature Range(without illumination): 0 to 65 °C
Temperature Range(with illumination): 10 °C to 65°C

Drug Stability Chamber 250-DSC201

Volume: 250 L
Illumination Intensity: 0 to 6000 Lux
Temperature Range (without illumination): 0 to 65 °C
Temperature Range (with illumination): 10 °C - 65°C

Drug Stability Chamber 500-DSC202

Volume: 500 L
Illumination Intensity: 0 to 6000 Lux (Adjustable)
Temperature Range (Without Illumination): 0 to 65 °C
Temperature Range (With Illumination) 10 °C to 65°C: 10 °C to 65°C

Ozone Test Chamber

Ozone Test Chamber 24-OTC100

Temperature Range: 0℃ to 100℃
Humidity Range: 30 % to 98 % R.H
Temperature Fluctuation: ± 0.5 ℃
Speed Rate for Cooling: Ambient to 0 ℃ within 20 min

Ozone Test Chamber 24-OTC101

Diameter of holder (mm): 400
Length of each side (mm): 180
Temperature range: 0℃ to 100℃
Humidity range: 30 % to 98 % R.H

Ozone Test Chamber 24-OTC102

Diameter of holder (mm): 600
Length of each side (mm): 220
Temperature range: 0℃ to 100℃
Humidity range: 30 % to 98 % R.H

Ozone Test Chamber 24-OTC103

Diameter of holder (mm): 700
Length of each side (mm): 350
Temperature range: 0℃ to 100℃
Humidity range: 30 % to 98 % R.H

Ozone Test Chamber 24-OTC104

Diameter of holder (mm): 900
Length of each side (mm): 460
Temperature range: 0℃ to 100℃
Humidity range: 30 % to 98 % R.H

Plant Growth Chamber

Plant Growth Chamber 300-PGC100

Chamber Volume: 300 L
Temperature Range: Without lighting: 4 to 50℃
With lighting: 10 to 50℃
Temperature Stability: ± 1 ℃
Temperature Uniformity: ± 2 ℃

Plant Growth Chamber 450-PGC101

Chamber Volume: 450 L
Temperature Range without lighting: 4 to 50℃
Temperature Range with lighting: 10 to 50℃
Temperature Stability: ± 1 ℃

Plant Growth Chamber 800-PGC102

Chamber Volume: 800 L
Temperature Range: Without lighting: 4 to 50℃
With lighting: 10 to 50℃
Temperature Stability: ± 1 ℃
Temperature Uniformity: ± 2 ℃

Plant Growth Chamber 250-PGC200

Chamber Volume: 250 L
Temperature Range: Without lighting: 0 to 50℃ With lighting: 10 to 50℃
Temperature Stability: ± 1 ℃
Temperature Uniformity: ± 1.5 ℃

Plant Growth Chamber 24-PGC202

Chamber Volume: 450 L
Shelves: 3(PCS)
Display Resolution: 0.1 ℃
Programmer Function: Temperature, humidity, light intensity, can be set separately, and 30 programmers Time range is 1 - 99 hours for each programmer

Plant Growth Chamber 800-PGC202

Chamber Volume: 800 L
Temperature Range: Without lighting: 0℃ to 50℃
With lighting: 10℃ to 50℃
Temperature Stability: ± 1 ℃
Temperature Uniformity: ± 1.5 ℃

Salt Spray Test Chamber

Salt Spray Test Chamber 24-STC100

Testing Room Capacity: 110 L
Temperature Range: Ambient to 60 ℃
Humidity Range: 95 % to 98 % RH
Temperature Fluctuations: ± 0.5 ℃

Salt Spray Test Chamber 24-STC101

Testing Room Capacity: 320 L
Temperature Range: Ambient to 60 ℃
Humidity Range: 95 % to 98 % RH
Temperature Fluctuations: ± 0.5 ℃

Salt Spray Test Chamber 24-STC102

Testing Room Capacity: 412 L
Temperature Range: Ambient to 60 ℃
Humidity Range: 95 % to 98 % RH
Temperature Fluctuations: ± 0.5 ℃

Salt Spray Test Chamber 24-STC103

Testing Room Capacity: 780 L
Temperature Range: Ambient to 60 ℃
Humidity Range: 95 % to 98 % RH
Temperature Fluctuations: ± 0.5 ℃

Salt Spray Test Chamber 24-STC104

Testing Room Capacity: 1036 L
Temperature Range: Ambient to 60 ℃
Humidity Range: 95 % to 98 % RH
Temperature Fluctuations: ± 0.5 ℃

Salt Spray Test Chamber 24-STC105

Testing Room Capacity: 1600 L
Temperature Range: Ambient to 60 ℃
Humidity Range: 95 % to 98 % RH
Temperature Fluctuations: ± 0.5 ℃

Sand and Dust Test Chamber

Sand and Dust Test Chamber 24-SDC100

Temperature range: Ambient to + 50 ℃
Relative Humidity: < 30 % RH
Normal wire diameter: 50 um
Normal width of a gap between wire: 75 um

Sand and Dust Test Chamber 24-SDC101

Temperature range: Ambient to + 50 ℃
Relative Humidity: < 30 % RH
Normal wire diameter: 50 um
Normal width of a gap between wire: 75 um

Sand and Dust Test Chamber 24-SDC102

Temperature range: Ambient to + 50 ℃
Relative Humidity: < 30 % RH
Normal wire diameter: 50 um
Normal width of a gap between wire: 75 um

Sand and Dust Test Chamber 24-SDC103

Temperature range: Ambient to + 50 ℃
Relative Humidity: < 30 % RH
Normal wire diameter: 50 um
Normal width of a gap between wire: 75 um

Temperature and Humidity Test Chamber

Temperature & Humidity Test Chamber 24-TTC200

Capacity: 100 L
Temperature range: (-20)℃ to 150 ℃ ,(-40) ℃ to 150 ℃ , (-70 )℃ to 150 ℃
Temperature cooling rate: 1 ℃ / min
Temperature heating rate: 3 ℃ / min

Temperature & Humidity Test Chamber 24-TTC201

Capacity: 225 L
Temperature range: (-20)℃ to 150 ℃ ,(-40) ℃ to 150 ℃ , (-70 )℃ to 150 ℃
Temperature cooling rate: 1 ℃ / min
Temperature heating rate: 3 ℃ / min

Temperature & Humidity Test Chamber 24-TTC202

Capacity: 500 L
Temperature range: (-20)℃ to 150 ℃ ,(-40) ℃ to 150 ℃ , (-70 )℃ to 150 ℃
Temperature cooling rate: 1 ℃ / min
Temperature heating rate: 3 ℃ / min

Temperature & Humidity Test Chamber 24-TTC203

Capacity: 800 L
Temperature range: (-20)℃ to 150 ℃ ,(-40) ℃ to 150 ℃ , (-70 )℃ to 150 ℃
Temperature cooling rate: 1 ℃ / min
Temperature heating rate: 3 ℃ / min

Temperature & Humidity Test Chamber 24-TTC204

Capacity: 1000 L
Temperature range: (-20)℃ to 150 ℃ ,(-40) ℃ to 150 ℃ , (-70 )℃ to 150 ℃
Temperature cooling rate: 1 ℃ / min
Temperature heating rate: 3 ℃ / min

Temperature & Humidity Test Chamber 24-TTC205

Capacity: 100 L
Temperature range: (-20)℃ to 150 ℃ ,(-40) ℃ to 150 ℃ , (-70 )℃ to 150 ℃
Temperature cooling rate: 5 ℃ / min
Temperature heating rate: 3 ℃ / min

Temperature & Humidity Test Chamber 24-TTC206

Capacity: 225 L
Temperature range: (-20)℃ to 150 ℃ ,(-40) ℃ to 150 ℃ , (-70 )℃ to 150 ℃
Temperature cooling rate: 5 ℃ / min
Temperature heating rate: 3 ℃ / min

Temperature & Humidity Test Chamber 24-TTC207

Capacity: 500 L
Temperature range: (-20)℃ to 150 ℃ ,(-40) ℃ to 150 ℃ , (-70 )℃ to 150 ℃
Temperature cooling rate: 5 ℃ / min
Temperature heating rate: 3 ℃ / min

Temperature & Humidity Test Chamber 24-TTC208

Capacity: 800 L
Temperature range: (-20)℃ to 150 ℃ ,(-40) ℃ to 150 ℃ , (-70 )℃ to 150 ℃
Temperature cooling rate: 5 ℃ / min
Temperature heating rate: 3 ℃ / min

Temperature & Humidity Test Chamber 24-TTC209

Capacity: 1000 L
Temperature range: (-20)℃ to 150 ℃ ,(-40) ℃ to 150 ℃ , (-70 )℃ to 150 ℃
Temperature cooling rate: 5 ℃ / min
Temperature heating rate: 3 ℃ / min

UV Test Chamber

UV Test Chamber 24-UTC100

UV Temperature Range: 50°C to 75°C
Testing Capacity: 48 piece (75 x 150 mm); 50 piece (75x 150 mm)
Water Consumption: Distilled water, 8liters per day
Dimension(W x D x H): 137 x 53 x 136 cm

UV Test Chamber 24-UTC200

Temperature Range: RT + 100 °C to 850 °C
Humidity range: At 400 °C: R.H. is 40 % to 85 % / At 800 °C: R.H. is 30 % ~ 50 %
Testing Time: 20 hours
Testing Voltage: 120 V to 145 V (135 V)

UV Test Chamber 24-UTC201

Temperature Range: RT + 100 °C to 630 °C
Humidity range: 30 % to 85 % RH
Testing Time: 20 hours
Testing Voltage: 120 V to 145 V

Xenon Test Chamber

Xenon Test Chamber 24-XTC100

Bandwidth Measurement: 280 to 800 nm
Specimen Capacity: 28 pcs
Specimen holder size: 80 × 15 mm
Chamber Temperature Range: Ambient to 100 ℃ ± 2 °C

Xenon Test Chamber 24-XTC101

Bandwidth Measurement: 300 to 420 nm
Specimen Capacity: 34 pcs
Specimen holder size: 80 × 15 mm
Chamber Temperature Range: Ambient to 100 ℃ ± 2 °C

Xenon Test Chamber 24-XTC102

Bandwidth Measurement: 280 to 800 nm
Specimen Capacity: 28 pcs
Specimen holder size (mm): 80 × 15
Chamber Temperature Range: Ambient to 100 ℃ ± 2 °C

Xenon Test Chamber 24-XTC103

Bandwidth Measurement: 300 to 420 nm
Specimen Capacity: 34 pcs
Specimen holder size: 80 × 15 mm
Chamber Temperature Range: Ambient to 100 ℃ ± 2 °C

NBS smoke chamber

NBS Smoke Chamber 71-SC100

Electrical: 110V AC 60Hz / 230V AC 50Hz
Gas supply: The preferred fuel gas used in the test is a mixture of air & propane
Propane: The flow needs to be capable of delivering 20ml/min at a minimum pressure of 5 KPa
Compressed air: The flow needs to be capable of delivering 750ml/min at a nominal pressure of 400 Kpa
Ambient temperature: Operating 10°C to 35°C

NBS Smoke Chmaber Upgrade 71A-SC100

Electrical: 230 volts AC 50 Hz
Fuse rating: Anti-Surge 10 amp fuse
Ambient temperature: Operating 10°C to 35°C
Apparatus dimension (W×H×D): 400 x 800 x 300 mm

Flame chamber

Flame Chamber 70-FC100

Electrical: 115 Volts AC 60Hz / 230 volts 50Hz
Ambient temperature: Operating 10°C to 35°C
Dimensions (W×H×D): 1.0m3 - 1500 x 826 x 1150 mm

Vertical flammability test chamber

FAA Flammability Test Chamber 70-FFTC100

Electrical: 230 volts AC 50Hz, 2 Amp / 115volts AC 60Hz, 4 Amp
Ambient temperature: Operating 10°C to 35°C
Dimensions (W×H×D): 752x 832 x 330 mm
Packed weight: 60 Kg

Flammability Test Equipment 70-FTE100

Electrical: 230 volts AC 50Hz volts / 115volts AC 60Hz
Ambient temperature: Operating 10°C to 35°C
Dimensions (W×H×D): 390x 540 x 230 mm

Vertical Flammability Test Chamber 70-VFTC200

Electrical: 230 V AC 50Hz volts/ 115 V AC 60Hz
Ambient temperature: Operating 10˚C to 35˚C
Gas supply: Commercial grade methane of minimum purity of 99% at a pressure of 0.2 Bar (2.5 psi) nominal
Dimensions (W×H×D): 430 × 800 × 330 mm