0
Temperature & Humidity Test Chamber 24-TTC203

Temperature & Humidity Test Chamber 24-TTC203

Price: $16390

Temperature and Humidity Test Chamber is designed to simulate constant climatic conditions for testing a wide variety of products for their quality, performance, shelf life and stability. It's used to simulate constant temperature and humidity conditions, thereby creating a physiologically ideal environment for product testing. A good temperature humidity chamber is essential for evaluating potential success or failure of a product in the field.

Capacity 800 L
Temperature range (-20)℃ to 150 ℃ ,(-40) ℃ to 150 ℃ , (-70 )℃ to 150 ℃
Temperature cooling rate 1 ℃ / min
Overall dimension (D x W x H) 1280 x 1550 x 2110 mm
Temperature heating rate 3 ℃ / min
Temperature fluctuations ± 0.5 ℃
Temperature deviation ± 2.0 ℃
Humidity range 20 % ~ 98 % R.H
Humidity deviation ± 2.5 % RH
High temperature 180 ℃
Lowest humidity 10 % RH
Internal dimension (D x W x H) 800 x 1000 x 1000 mm
  • Ideal for high and low temperature testing
    Easy to use LCD touch screen controller and a graphic display to allow monitoring of the set and actual working parameters
    Humidity controller
    Corrosion resistant interior chamber
    Observation window: Built-in toughened double layered glass
    Independent R and D software
    Humidity regulation with capacitive humidity sensor
    Inner chamber material : Stainless steel plate
    Thermal-insulating material resistant to high temperature and density
    Compressor overload switch
    Unit shuts down after alarm for over heating
    Safety self-protection function includes short circuit, over temperature, motor overheating, compressor pressure, fuse failure
    Windows with anti - sweat heater device to prevent water from vapor condensation and water droplets
  • Extensively used in basic and advanced research, pharmaceutical industries, chemical industries, food and beverage industry.

Customer Reviews

Submit Your Review

Drug stability chamber

Ozone Test Chamber

Plant Growth Chamber

Salt Spray Test Chamber

Sand and Dust Test Chamber

Temperature and Humidity Test Chamber

UV Test Chamber

UV Test Chamber 24-UTC100

  • UV Temperature: 50 °C to 75 °C
  • Testing Capacity: 48 piece (75 x 150 mm); 50 piece (75x 150 mm)
  • Weight: 136 kg
  • Water Consumption: Distilled water, 8liters per day

UV Test Chamber 24-UTC200

  • Temperature Range: RT + 100 °C ~ 850 °C
  • Humidity range: At 400 °C: R.H. is 40 % ~ 85 % / At 800 °C: R.H. is 30 % ~ 50 %
  • Testing Time: 20 hours
  • Testing Voltage: 120 V ~ 145 V (135 V)

UV Test Chamber 24-UTC201

  • Temperature Range: RT + 100 °C ~ 630 °C
  • Humidity range: 30 % ~ 85 % RH
  • Testing Time: 20 hours
  • Testing Voltage: 120 V ~ 145 V

Xenon Test Chamber

NBS smoke chamber

NBS Smoke Chamber 71-SC100

  • Electrical: 110V AC 60Hz / 230V AC 50Hz
  • Gas supply: The preferred fuel gas used in the test is a mixture of air & propane
    Propane: The flow needs to be capable of delivering 20ml/min at a minimum pressure of 5 KPa
  • Compressed air: The flow needs to be capable of delivering 750ml/min at a nominal pressure of 400 Kpa
  • Ambient temperature: Operating 10°C to 35°C

NBS Smoke Chmaber Upgrade 71A-SC100

  • Electrical: 230 volts AC 50 Hz
  • Fuse rating: Anti-Surge 10 amp fuse
  • Ambient temperature: Operating 10°C to 35°C
  • Apparatus dimension (W×H×D): 400 x 800 x 300 mm

Flame chamber

Flame Chamber 70-FC100

  • Electrical: 115 Volts AC 60Hz / 230 volts 50Hz
  • Ambient temperature: Operating 10°C to 35°C
  • Dimensions (W×H×D): 1.0m3 - 1500 x 826 x 1150 mm

Spread of Flame Apparatus 70-SFA100

  • Electrical: 230 Volts AC 50 Hz or 115 Volts AC 60 Hz
  • Gas supply: The radiant panel of the apparatus can burn propane or natural gas. Typical gas supply requirements are a flow of up to 0.8 litres/second at a supply pressure of 200 mm water gauge.
  • Air supply: Air supply of up to 10 litres/second and at a supply pressure of approximately 300 mm water gauge is required
  • Dimensions (W×H×D): The radiant panel has overall dimensions of approximately 480 mm by 280 mm

Vertical flammability test chamber

FAA Flammability Test Chamber 70-FFTC100

  • Electrical: 230 volts AC 50Hz, 2 Amp / 115volts AC 60Hz, 4 Amp
  • Ambient temperature: Operating 10°C to 35°C
  • Dimensions (W×H×D): 752x 832 x 330 mm
  • Packed weight: 60 Kg

Flammability Test Equipment 70-FTE100

  • Electrical: 230 volts AC 50Hz volts / 115volts AC 60Hz
  • Ambient temperature: Operating 10°C to 35°C
  • Dimensions (W×H×D): 390x 540 x 230 mm

Vertical Flammability Test Chamber 70-VFTC200

  • Electrical: 230 V AC 50Hz volts/ 115 V AC 60Hz
  • Ambient temperature: Operating 10˚C to 35˚C
  • Gas supply: Commercial grade methane of minimum purity of 99% at a pressure of 0.2 Bar (2.5 psi) nominal
  • Dimensions (W×H×D): 430 × 800 × 330 mm

Temperature Humidity Test Chamber